The maximum number of products to compare is 4.
You can only compare products from the same category.
Would you like to remove all products from the comparison tool and add this one instead?
UNCOMPROMISING PERFORMANCE IN INDUSTRIAL WELDING
SPARTUS ProMIG 5000 is a technologically advanced inverter welding power source designed for the most demanding industrial applications. The unit has been engineered for continuous operation in production environments where reliability, repeatability, and full control over the welding process are crucial. Thanks to its 100% duty cycle at a maximum current of 500A, the ProMIG 5000 ensures a stable arc and high weld quality even under prolonged load.
MIG WELDING – INTELLIGENT SYNERGY AND FULL PROCESS CONTROL
SPARTUS ProMIG 5000 offers extensive MIG/MAG welding capabilities, combining manual mode with an advanced synergic mode based on pre-defined synergic programs. In MIG Synergy mode, the machine actively supports the operator by suggesting optimal working parameters such as material thickness and wire feed speed, significantly reducing setup time and simplifying operation in variable production tasks. At the same time, the user retains full control over the process thanks to the ability of manual parameter adjustment, allowing precise arc characteristic tuning to individual preferences and material specifications.
SPARTUS ProMIG 5000 provides advanced configuration options for the MIG/MAG welding process that go beyond standard settings available in conventional semi-automatic machines. The user has access to precise adjustment of parameters such as pre-flow and post-flow gas time, burn back, and soft wire feed start (slow feed), enabling optimal process preparation and minimizing weld defects.
Additionally, the device allows arc dynamics control through adjustment of initial and final current as well as rise and fall times. This wide adjustment range makes it possible to tailor welding characteristics to specific technological applications, improving weld quality, process stability, and repeatability in serial production.
The unit supports various torch control modes, including 2T, 4T, and 4T+, which increases ergonomics and operator comfort during long welds and tasks requiring reduced fatigue. Furthermore, the SPOT welding function enables fast and repeatable tack welds, making it particularly useful in assembly work and thin sheet production.
SPARTUS ProMIG 5000 is designed to work with a wide range of welding materials. The unit supports welding of carbon steel, stainless steel, aluminium, and CuSi3, making it a versatile solution for production plants and industrial workshops. Thanks to extensive synergic settings, users can select the appropriate wire type and shielding gas, including argon and CO₂ mixtures, optimizing welding parameters depending on the material and technological requirements. This solution increases efficiency and ensures high weld quality across various applications.
A precise four-roll wire feeder ensures stable and consistent feeding of welding material even under heavy loads and with long welding cables. The wide range of supported wire diameters and the ability to use large spools make the device ideal for both serial production and heavy steel structure fabrication. An additional advantage is the possibility of connecting a Spool Gun type torch, which significantly expands application range, especially for aluminium welding and operations requiring maximum wire feeding stability.
Synergy programs
SPARTUS ProMIG 5000 został wyposażony w zintegrowane programy synergiczne, które inteligentnie dopasowują parametry pracy do używanego drutu i gazu osłonowego. Funkcja ta znacząco skraca czas konfiguracji, zapewniając powtarzalność ustawień i optymalne rezultaty w każdym cyklu spawania.
| MATERIAL | SHIELDING GAS | WIRE DIAMETER |
|---|---|---|
| steel | CO2 / 80%Ar+20% CO2 | 0.8 – 1.6mm |
| flux core | CO2 | 1.0 – 1.6mm |
| stainless steel | 98%Ar+2%O2 | 0.8 – 1.6mm |
| AlMg | 100%Ar | 1.0 – 1.6mm |
| CuSi | 100%Ar | 1.0mm |
MIG 501 TORCH WITH ADVANCED HANDLE CONTROL
SPARTUS ProMIG 5000 is available in the TOWER version, supplied with a standard SP 501 4m MIG gun and a specialized torch with an integrated control system in the handle, which provides a significant advantage over standard solutions available on the market. Unlike conventional MIG torches, this solution enables direct adjustment of voltage and welding current from the torch handle, without the need to operate the main control panel. This significantly improves ergonomics and allows the operator to dynamically adjust parameters during welding, which is especially important when working on large structures, in hard-to-reach areas, or under changing technological conditions. Real-time adjustment translates into better arc control, process stability, and higher weld quality.
The use of a MIG 501 torch with handle control is an industrial-grade solution dedicated to users expecting maximum precision, efficiency, and comfort during continuous operation.
MODERN CONTROL PANEL AND INTUITIVE OPERATION
SPARTUS ProMIG 5000 is equipped with a modern control panel with a clear touchscreen display, providing quick access to all key machine functions. The intuitive interface and ergonomic control knobs allow precise parameter adjustment and smooth navigation through the menu, even in demanding production conditions. The integrated control system enables not only welding parameter configuration but also quick selection of working mode, material type, wire diameter, and shielding gas.
TIG LIFT – PRECISION WHERE DETAILS MATTER
The TIG DC Lift function enables precise welds with full control over parameters. Adjustment of current down-slope time and post-gas flow allows tailoring the process to specific tasks. This is an ideal solution wherever high aesthetics and precision are required, without the need for HF ignition.
MMA – ARC STABILITY IN ALL CONDITIONS
SPARTUS ProMIG 5000 also offers efficient MMA welding, ensuring a stable arc over a wide current range. Features such as Arc Force, Hot Start, and VRD support reliable arc ignition and stability even in demanding on-site or field conditions where equipment reliability is critical.
MEMORY CHANNELS – QUICK ACCESS TO SETTINGS
SPARTUS ProMIG 5000 is equipped with an advanced memory system that significantly improves workflow in production environments. The unit allows saving and quickly recalling up to 100 JOB programs, enabling the operator to instantly switch between different welding configurations without the need to set parameters from scratch each time. This feature is especially useful when working with different materials, thicknesses, and repetitive tasks.
ADVANCED COOLING SYSTEM – ADAPTED TO REAL WORKING CONDITIONS
SPARTUS ProMIG 5000 is equipped with an external liquid cooling unit, significantly enhancing performance under high loads. An important feature is the ability to switch the cooling system on or off, allowing the machine configuration to be adapted to current needs. At lower currents, the operator can use lighter air-cooled torches without activating liquid cooling, while at higher parameters the cooling system ensures stability and protects components.
Additionally, the cooling unit is equipped with a temperature monitoring display, enabling real-time control of operating conditions and increasing overall process safety.
INDUSTRIAL DESIGN AND MOBILE WORKSTATION
The device design is based on a separate wire feeder, modern cooling unit, and a robust power source, increasing flexibility in configuring the welding workstation. The entire system is integrated with a durable transport trolley equipped with space for a gas cylinder, facilitating work organization and ensuring convenience in production environments. This solution allows easy mobility and optimal use of workspace.
SAFETY AND RELIABILITY
SPARTUS ProMIG 5000 has been designed for intensive use in industrial environments. The unit is equipped with an overheat protection system that automatically protects components in case of excessive load, ensuring continuous and safe operation. Solid construction, high insulation class, and IP23S protection rating allow operation in demanding production conditions. Stable parameters, resistance to heavy loads, and refined design make the ProMIG 5000 a reliable welding power source for long-term operation without downtime.
RELIABLE SOURCE FOR CONTINUOUS OPERATION
SPARTUS ProMIG 5000 is designed for continuous operation in high-load environments. A high current range up to 500A, 100% duty cycle, parameter stability, and resistance to intensive use make this model ideal for production plants, steel structures, and wherever performance and reliability matter most.
EQUIPMENT
SPARTUS ProMIG 5000 is available both as a power source with a cooling unit and as part of a tailored package.
Package equipped:
• ProMIG 5000 • wire guide roller 1.0 – 1.2V fi30
• separated wire feeder 4R
• cooler
• driving set
• MaxCoolant – cooling liquid 5l
• 5m connection cable set
• MIG gun 501 with UP&DOWN control in the handle, 4 m
• 3m electrode holder
• 3m mass cable with screw clamp
• user’s manual
